Compra 2 y obtén envío gratis ⋅ Devoluciones gratuitas durante 14 días ⋅ 2 años de garantía Compra ahora
For Macbook Air M4 13 inch A3240 Touchpad
$56.05–$71.60
For Macbook Air M4 15 inch A3241 Touchpad
$62.71–$67.16
For Macbook Air M4 13 inch A3240 Touchpad
$56.05–$71.60
For Macbook Air M4 15 inch A3241 Touchpad
$62.71–$67.16
Descripción
1. Different dents can be repaired for the car, such as hail damage, collision damage and other dents.
2. Nothing is lost from the original car of the painting.
3. Very easy to operate.
4. Save money, you do not have to go to 4S store to pay a lot of money to repair.
5. How to use this paintless dent repair kits
(1). Clean the dent with a clean wet cloth;
(2). Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
(3). Use a proper drawing gasket. Large dent requires a large drawing gasket.
(4). Pull the trigger and apply the drawing gasket with extruded glue;
(5). Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
(6). Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
(7). Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
(8). Clean the repaired place with a clean wet cloth.
2. Nothing is lost from the original car of the painting.
3. Very easy to operate.
4. Save money, you do not have to go to 4S store to pay a lot of money to repair.
5. How to use this paintless dent repair kits
(1). Clean the dent with a clean wet cloth;
(2). Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
(3). Use a proper drawing gasket. Large dent requires a large drawing gasket.
(4). Pull the trigger and apply the drawing gasket with extruded glue;
(5). Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
(6). Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
(7). Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
(8). Clean the repaired place with a clean wet cloth.
Specification:
Package Weight |
|
Reseñas
Productos relacionados
Productos vistos recientemente
Copyright © BSPART . Todos los derechos reservados.
Título




Shopping cart